2005 Ford FPV BA MkII Falcon GTP - Twin Turbo 722rwkW
$200,000 PLUS! spent on the build of this immaculate and highly modified BA Mk II FPV GT-P, now running a professional Garrett twin turbo set up and pumping out an incredible 722rwkw!
GTP build number 370 is a one owner car purchased new from City Ford, Sydney in August 2005. In stunning Mandarin Red with Charcoal leather and showing just 43,000km from new. The car comes complete with full service and modification history, receipts, images, log books, FPV documents and certification.
In March 2009 the owner began modifying the GT-P with the build completed in mid-2012 at a cost in excess of $200,000. Modifications include a custom twin turbo and manifold setup using twin Garret GTX3582R turbo chargers and a Yella Terra mono blade throttle body. Internal mods are considerable including Manley valve train, special pistons, forged “H” beam rods, ARP bolts and a Herrod high volume sump and oil pump. Further engineering committed to a magnificent custom-made cooling system, custom stainless steel exhaust and Autotech custom fuel system.
Fitted with a Tremec 6 speed T56 Magnum road/comp gearbox by Mal Wood and billet short throw shift. Also fitted is an Extreme triple plate carbon 1350kg clutch with flywheel and slave cylinder through to a Harrop Truetrac diff centre with Ford 3.46:1 gears.
Wheels are genuine Simmons FR1 rims 8.5" fronts and 9.5" rears, on Dunlop Direzza Z1 Star Spec 275/30/19 (rear tyres) / 245/35/19 Nitto's (front tyres). The rear guards have been professionally rolled to fit the massive rear rubber. Braking is AP 6/4 pot calipers with 362mm front and 328mm rear vented rotors with performance Ferodo DS2500 brake pads. Suspension has been upgraded to Bilstein front and rear shocks + Koni springs with a Whiteline front and rear sway bar kit fitted.
Body modifications are subtle and include genuine Shelby Mustang Super Snake bonnet vents and custom fitted Xtreme Interceptor triple gauges/ fluid temp and oil pressure sensors. The car is pampered and mainly used for weekend cruises and car shows.
The car has run 11.2 sec @137 mph on the quarter mile, and achieved 295 km/h top speed at the 2016 Snowy Mountains 1000 event.
In our Kingsgrove, Sydney showroom for your immediate inspection. (Ref: 5475)
Price: $69,000 Vin: 6FPAAAJGSW5R71691 Build: June 2005 Build Specifications: Billet 5.4 oil pump gears, Underdrive pulleys, BA GT cam kit (exhaust), Yella Terra plenum lid, Yella Terra mono blade throttle body, Manley titanium valve retainer set • Manley valve springs • Manley forged “H” beam rods • Manley forged 18cc spherical dish pistons • Piston rings • Race bearings • Full gasket kit • Head stud kit • Timing chain tensioner • ARP camshaft bolts • Herrod high volume sump • PWR polished water tank • Platinum spark plugs (colder heat range) • 80lb injectors • Custom engine bay paint/ceramic coating, exhaust manifolds, plenum, rocker covers, pulleys, sump, timing case cover, water pump, alternator etc. • Custom-made stainless-steel front engine and radiator covers • Custom-made stainless-steel turbo shields Custom Cooling System - Radiator and Thermo Fans • Custom built radiator alloy • Custom fan shroud • 53 hours labour Custom Twin Turbo and Manifold set up • Garrett Turbochargers GTX3582R • External waste gate 44mm, 1.0 Bar • Custom built PWR intercooler • K&N air filter 3.5" • Turbo Smart BOV • Turbo smart boost controller • 330 + hours labour Custom Exhaust System • Custom rear muffler S/S 3.5" in dual 3" out • Custom centre hog dog S/S 3.5" with S/S packing • Custom 4.5" pipe over diff • Catalytic convertor H/F • Exhaust Tip 3.5" S/S • 50 hours labour Autotech Custom Fuel System • Custom make surge tank from stainless steel with fittings and mounting brackets to suit. Mount surge tank in boot as required and fit fuel pumps. Remove inlet plenum and fuel rails. Modify fuel rails as required and refit to engine. Mount fuel pressure regulator as required and connect up all fuel hoses to suit. Run and mount new fuel pipe from rear of vehicle. Connect up new fuel pump hoses as required and refit inlet plenum. Remove and refit original fuel pump assembly and modify fuel return as required. Wire up twin Bosch 44 fuel pumps with relays as required. Relocate battery next to surge tank and make up cover from ply wood. Transmission • Tremec 6 speed T56 Magnum Mal Wood special build road/ race + billet short throw shift • Extreme triple plate carbon 1350kg clutch with flywheel and slave cylinder Driveline • Harrop Truetrac diff centre • Ford 3.46 diff • Harrop diff cover • Chromemoly drive shafts • Mark William front and rear weld yoke, two piece Hardy Spicer chromemoly tail shaft • Seam weld diff cradle for extra strength • Super pro centre diff bush and front diff bushes Wheels and brakes and suspension • Genuine/original Simmons FR19 rims 8.5" fronts and 9.5" rears • Dunlop Direzza Z1 Star Spec 275/30/19 (rear tyres)/ 245/35/19 Nitto's (front tyres) • Professionally roll rear guards • AP 6/4 pot calipers with 362mm front and 328mm rear rotors with performance Ferodo DS2500 brake pads • Bilstein front and rear shocks + Koni springs to suit high HP • Whiteline front and rear sway bar kit Body • Genuine Shelby Mustang Super Snake bonnet vent pair, custom fitted Interior • Xtreme Interceptor triple gauges/ fluid temp and oil pressure sensors
Call Mike on 0414 278 604 or Nicholas on 0499 577 997 and let us assist you with your inquiries. Also please note if you have a quality Muscle or Classic car you wish to list or have valued please give us a call. We will be happy to assist you.
Terms of sale
Vehicles offered for sale through AMCS are the responsibility of the Owner / Seller. AMCS acts as the Seller's agent and relies fully on the information provided by the Seller of the vehicle in the advertising and sale of each vehicle. AMCS takes no responsibility for the accuracy or veracity of the information provided by the Seller.
When a Buyer wishes to speak to the owner or inspect a vehicle listed for sale on the AMCS web site, AMCS will request a copy of the potential buyers driver's license or a business card along with an email address and phone number. This is provided to the seller as confirmation of the legitimacy of the buyer and the seller is then asked to contact the potential buyer to discuss the car and set up an inspection if required.
The Buyer must make his own enquiries and inspections regarding the condition, authenticity and veracity of the vehicle and any statements made by the Seller, and satisfy themselves in all aspects prior to purchasing the car from the Seller. The Buyer understands there is no warranty or guarantee offered by either the Seller or AMCS.
If upon inspection the Buyer is not satisfied with the car for any reason and does not wish to proceed with the purchase the owner is advised and any personal details are deleted from AMCS records.
If the Buyer is satisfied with the car and a price is agreed to with the Seller a formal tax invoice is prepared by AMCS and sent to the Buyer for payment to the AMCS audited Trust Account. AMCS also receives a formal Bill of Sale from the owner stating the car is free of encumbrance and noting banking details for the transaction. Once AMCS receives the total payment cleared into its trust account a transfer is then made to the Seller.
AMCS receives a fee of 7.5% (incl. GST) of the sale price for assisting the Seller to sell the vehicle. There is no fee or Buyer's premium charged to the Buyer.